Navigation
the easiest free blog site to use. You will be able to use this How-Too blog to find out how to make your very own adult blog. We will show you step by step
on how to do it. Once we're finished you will be telling yourself "that was easy!". Ok, are you ready to get started!
First off, you're going to need to sign up for the following.
1.Thumblogger
2.Feedburner
3.Add This!
4.Adengage
Step 1:
First, you will need to register with Thumblogger. Once you're registered and all set up. You will have to access your control panel. Click on "Add a new blog to your account" and choose the name you want for your subdomain, the name of your blog, make sure its "Listed" then choose the category that best fits your new blog. Once thats all set, type in the code to continue. Once you get to the second screen, this is where you will choose your own blog template. Now, if you're a person that knows alot of about HTML, you can choose any of the blogs. If you're new with the whole HTML thing, then go to the bottom and choose a blog with a red W next to it. Once you're all set with that, you can continue onto step 2.
Step 2:
Now, click on the blog you just created, click on Options tab on top. Now, make sure yours is the same as the picture below.
Still on the options tab, click on Box Move, move the boxes, Info and Bookmark to the center then click Change. Once you're done with those continue on to step 3.
Step 3:
Now that were all done with steps 1 and 2. Step 3, this is simple. You're going to click on the Looks tab. Click on, HTML Begin and put in the title of your blog in the first box. In the second box you're going to write a description of your blog using 1 or 2 sentences to describe your blog. In the 3rd box you're going to use atleast 10 keywords that you think will work best for people who are going to search for the niche you're using. In the 4th box, just put your name for the Author of the blog.Then click change. Now click on Page Header. If you're going to use a image header you made, in #1 click on the box to Enabe image header.Go to the 2nd box and put in the link to your image header in the 3rd box titled Image Header. If you're using a text header, skip down to #3 and fill in the 2 boxes. Then click change. If you want to change the colors of your blog go back to the looks section and click on Colors and styles. Once you're done with that, click change. Now, you're ready for step 4.
Step 4:
You're going to click on youre options tab again, and go all the way down to the bottom to RSS. It should look like this once your done.
Once you're done with that, click change. It takes about 15-25 min for your feed to start. Once it has started you can go to Feedburner and login to your account you created. In the RSS section on your control panel in Thumblogger there is your RSS link. Copy that link and paste it into the box in Feedburner where it says, Burn a feed right this instant, then click Next. Once you've done that click on the Publicize tab. You're goin to use Ping Shot, Feed Count and Chicklet Chooser. Once you've done the first 2 and are now on Chicklet Chooser, I usually use 5 choices. Once you are all done with this you're ready to continue on to step 5.
Step 5:Ok, now. We're going to go back to our Thumblogger control panel and click on Options and the Sticky tab. Open up a new window or tab for internet and go to your adengage account at the adengage website. Your going to add your blog and once you've completed all the steps. Post your code in the top Sticky box in your control panel and click submit. Below is how I do my adengage settings. If you want, you can do yours the same way I do mine. Once you have done that, copied and pasted the code into your Sticky box in Thumblogger. You're all set to continue on to step 6.
Step 6:In step 6, we are going to start finding sponsors for your blog niche. Sponsors are going to be what you use for content. I tend to use atleast 5 sponsors per blog. You can use more, or you can use less, its all up to you and how you want to do it. To find sponsors in your niche visit Adult Blog Sponsors and click on the category that best fits your niche. Find the sites that you want to use, sign up for them and get some banners for your niche using the sites they have to place in your sticky box. You can also put banners on the sides of your blog by going to Options>Boxes>Then click Edit on the right side and make sure you enable the box. Now you can place your banners in there. Some sponsors don't host the images for you, so you will need to find somewhere to host your images. Thumblogger provides you with Image Turtle if you dont have anywhere to host images. Do Not host your images on Photobucket, they will be taken down since it is porn. Now, you're ready for step 7!
Step 7:You're finally getting close to the end! Now that you have some banners and text ads, its time to add some content! From the sponsors you chose, open one up and choose a site thats in your niche. You want to use there FHG's, which means Free Hosted Galleries. I use w.Bloggar to make my posts. Thumblogger is compatible with it but for now, you can use the provided one in the control panel. To make your first blog post. You're going to go to, Blog>Add new blog entry and then its pretty much self explanatory there. Once you get used to it, I will show you how to use w.Bloggar. That will be shown in a seperate post. How about we get your new blog on to some Blog Directories. Continue to step 8 for that.
Step 8:Lets get your blog out there for people to see! To do this you're going to go to Blog Submitter and enter the information it asks for. Once you're done with that, you're ready to join Adult Webmaster Group and post your new blog for everyone to see!
Step 6:In step 6, we are going to start finding sponsors for your blog niche. Sponsors are going to be what you use for content. I tend to use atleast 5 sponsors per blog. You can use more, or you can use less, its all up to you and how you want to do it. To find sponsors in your niche visit Adult Blog Sponsors and click on the category that best fits your niche. Find the sites that you want to use, sign up for them and get some banners for your niche using the sites they have to place in your sticky box. You can also put banners on the sides of your blog by going to Options>Boxes>Then click Edit on the right side and make sure you enable the box. Now you can place your banners in there. Some sponsors don't host the images for you, so you will need to find somewhere to host your images. Thumblogger provides you with Image Turtle if you dont have anywhere to host images. Do Not host your images on Photobucket, they will be taken down since it is porn. Now, you're ready for step 7!
Step 7:You're finally getting close to the end! Now that you have some banners and text ads, its time to add some content! From the sponsors you chose, open one up and choose a site thats in your niche. You want to use there FHG's, which means Free Hosted Galleries. I use w.Bloggar to make my posts. Thumblogger is compatible with it but for now, you can use the provided one in the control panel. To make your first blog post. You're going to go to, Blog>Add new blog entry and then its pretty much self explanatory there. Once you get used to it, I will show you how to use w.Bloggar. That will be shown in a seperate post. How about we get your new blog on to some Blog Directories. Continue to step 8 for that.
Step 8:Lets get your blog out there for people to see! To do this you're going to go to Blog Submitter and enter the information it asks for. Once you're done with that, you're ready to join Adult Webmaster Group and post your new blog for everyone to see!
Ok! One of the steps in the how to involved Adengage. Here, I will show you how to get Adengage onto your blog. Just follow the easy instructions below and you will be on your way!
Step 1:
First, if you haven't signed up yet. Lets do it now. Click here to sign up. When you get there, make sure that it looks like this before you continue.
Step 2:
Once you've gone through and completed each step for signing up. You will need to login to your Adengage account. In the following image below, this is where you will go to start putting ads on your blog.
Step 3:
Now, follow the steps in the following image below. Once you're done, continue to step 4.
Step 4:
Now that you have your ad set up, you can now copy and paste the code into your blog. I suggest putting the code in the Sticky box on your blog. To get there go to Options>Sticky. Now, place the code in the top box and click Change.
Congratulations!! You're now finished! Now, don't be alarmed if you don't see the ads on your blog right away, It takes a few minutes for the ads to show up.
Step 1:
First, if you haven't signed up yet. Lets do it now. Click here to sign up. When you get there, make sure that it looks like this before you continue.
Step 2:
Once you've gone through and completed each step for signing up. You will need to login to your Adengage account. In the following image below, this is where you will go to start putting ads on your blog.
Step 3:
Now, follow the steps in the following image below. Once you're done, continue to step 4.
Step 4:
Now that you have your ad set up, you can now copy and paste the code into your blog. I suggest putting the code in the Sticky box on your blog. To get there go to Options>Sticky. Now, place the code in the top box and click Change.
Congratulations!! You're now finished! Now, don't be alarmed if you don't see the ads on your blog right away, It takes a few minutes for the ads to show up.
I will show you how to set up and use w.Bloggar. w.Bloggar is a post and template editor. You can use it for all of your blogs.I find it the easiest tool for making blog posts. Now, lets get started. First you need to download w.Bloggar here. Once you've got it set up. You're going to need to login to your Thumblogger account.
Step1:Once you're in your Thumblogger control panel. Click on the Options tab. Make sure yours looks like this. Then click Change
Step 2:Now were going to begin to install and configure w.Bloggar. Follow the simple steps below after you have installed w.Bloggar and are ready to configure it to start posting.
1.Choose "Yes I want to add it as a new account. Then click Next.
2.Change Blog Tool to (custom). Put in the name of your blog in the Alias field. Then click Next.
3.Change the Templates field to Not Supported.Then click Next.
4.Put in www.thumblogger.com in the Host box. Put in / for the path box. And change Port to 2020 and un-check UTF-8.Then click Next.
5.Enter your Thumblogger username and password. If you want, click Save Password. Then click Finish! Now you're all set to start using w.Bloggar to make posts to your blog!
Step1:Once you're in your Thumblogger control panel. Click on the Options tab. Make sure yours looks like this. Then click Change
Step 2:Now were going to begin to install and configure w.Bloggar. Follow the simple steps below after you have installed w.Bloggar and are ready to configure it to start posting.
1.Choose "Yes I want to add it as a new account. Then click Next.
2.Change Blog Tool to (custom). Put in the name of your blog in the Alias field. Then click Next.
3.Change the Templates field to Not Supported.Then click Next.
4.Put in www.thumblogger.com in the Host box. Put in / for the path box. And change Port to 2020 and un-check UTF-8.Then click Next.
5.Enter your Thumblogger username and password. If you want, click Save Password. Then click Finish! Now you're all set to start using w.Bloggar to make posts to your blog!
Navigation
/ Home